Replacing the digitizer of HTC wildfire

The digitizer of HTC broke 'cause of the amount of verbal stress it was put thru - thanks to PN for carrying out the stress test :).

Before
After
Digitizer: is the one that converts our actions into a digital signal that the phone understands. The data from the digitizer(glass) is transferred to the phone by the attached digitizer flex cable or digitizer flex ribbon that is included in the purchase of a replacement LCD digitizer.
THere are 3 major components
- the digitizer(front glass)
- the digitizer flex cable(should be attached to the glass)
- the LCD display unit
digitizer and the flex cable

The digitilizer was ordered from ebay.
Replacing the digitizer involves opening up of the device and putting enough of effort to get the digitizer detached from the frame 'cause it is glued to the frame. 
Various images are rendered to show how its done. 
with battery removed






The digitizer we got was not having anykind of glue on it, so the double sided tape was used to stick. (image)

Youtube videos that was/were extremely helpful.
http://www.youtube.com/watch?v=9JUEAArBUE4
http://www.youtube.com/watch?v=Y68awioGL54

0 comments:

Post a Comment

Note: Only a member of this blog may post a comment.

top