Upgrading HP elitebook's HDD to an SSD

Take out the battery by unlocking A.

Take out the harddrive covering by unscrewing 2 screws marked B 

Take out 4 screws marked C

Pulling out D will remove the hard drive

Unscrew 4 screws E from the side of the harddrive to take out the covering

SSD came with some sort of carrier rails, take out the SSD from the carrier



Image shows the HDD and SSD + connector

 Assembling SSD backon is the homework :)

Personally would have preferred Video of replacing the Disk (Might do it someday)
Thought, making a dual boot system along side Ubuntu would be a breeze but few issues proved it otherwise. Taking corrective measures all through out was the real highlight(It worked, and here is the log of  the experience). So instead of naming it as yet another "Dual booting Ubuntu 18.04 with Win7" this is based on the bitlocker, GRUB, MBR, Windoz7. Thanks to the online material and Google. For further reference see links given at the end of the log.

Taking corrective measures on the fly(as recollected from memory)


  • Reimaged HP-elitebook folio 9470m with win7(Due to privacy policy won't be logging the complete image of how it was reimaged)

Reimaging the device with win7 didn't allow disk space partitioning. So the whole disk space was allocated.


  • Resized/shrinked win7 partition

Before doing that be sure to disable the bitlocker.

To install ubuntu 18.04 on the device, made use of mini disk partition tool to shrink or resize the win partition.


  • Installed linux with GRUB on MBR

Installed ubuntu 18.04 on the newly freed up disk space
Image shows partition sda5 to 9 used by linux.
GRUB is the new bootloader which also has entry for win7 and is installed in /dev/sda(MBR)


  • Unable to activate bitlocker due to TPM issues

After loging into win7, was unable to activate bitlocker gave following error


  • Created new parition in linux using gparted for GRUB 1st stage boot loader

Resized swap partition for grub 1st stage boot loader






  • Took backup of GRUB on USB drive and in the home dir and wrote grub in that partition

sudo grub-install /dev/sdb

sudo dd if=/dev/sda of=/home/priya/linux.mbr.bin bs=512 count=1


  • Fixed win7 mbr using system recovery console

Since windows installation disc was not available. To fixMBR with windows recovery option, Reboot the laptop
press f8 to get to the advanced boot options select Repair your computer option
select command prompt.
This will prompt for admin account
select command prompt

In the prompt
X:\windows\system32>bootrec /FixMbr










  • Made an entry for ubuntu in windows bootloader
Now boot in windows and create an entry for GRUB in windows boot loader using bcdedit
append an entry for GRUB

Microsoft Windows Wersion 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved. C:\windows\system32>bcdedit /create /d "GRUB" /application BOOTSECTOR 
The entry {d3ffdlo3c-6316-1101-bba9-a0481c09207} was successfully created.
C:\windows\system32>bcdedit /set {d3ffdlo3c-6316-1101-bba9-a0481c09207} device boot 
The operation completed successfully.
C:\windows\system32>bcdedit /set {d3ffdlo3c-6316-1101-bba9-a0481c09207} device partition=C: 
The operation completed successfully.
C:\windows\system32>bcdedit /set {d3ffdlo3c-6316-1101-bba9-a0481c09207} PATH \linuxmbr.bin 
The operation completed successfully.
C:\windows\system32>bcdedit /displayorder {d3ffdlo3c-6316-1101-bba9-a0481c09207} /addlast 
The operation completed successfully.
C:\windows\system32>bcdedit /timeout 10
The operation completed successfully.
C:\windows\system32›. 




  • Bitlocker can be activated after populating mbr with windows bootloader 




Show the video recording of how things work with bitlocker enabled and GRUB
also record the bootable grub 1st stage in usb - usb-grub.1.jpg

To check whether win7 uses UEFI or legacy BIOS

https://neosmart.net/wiki/bootrec/#If_you_don8217t_have_the_installation_disc-2

Difference between clean installation/reinstallation and reimaging
Image file is the exact copy of OS running on the specific HW along the the partition. It can only be installed on that specific HW. Clean installation can be installed on different HW with harddisk partitioning available at the time of installing.
qwqwqwqwq

How to convert a non-bootable Win7 USB BOOTABLE

Downloaded an (PC COE) OS image (Windows 7 - 64 bit) for specific laptop model(HP elitebook folio) to USB media which wasn't bootable

Using Imgburn, follow the steps below

As an example, making use of files copied from the non bootable USB media in the source folder

Destination folder and file name

To make the non-bootable usb image bootable use the etfsboot.com in the advanced tab -->Boot Image

Build




Using imgburn software made a non-bootable iso image of the non bootable files downloaded in USB

Imgburn can detect whether its a bootable or non bootable image
In write mode, select the iso images



To write the bootable iso to USB, used rufus , imgburn can also to used to create a bootable usb



ref:- https://mindthebandgap.wordpress.com/2013/03/13/how-to-convert-bootable-usb-into-an-iso-file/
Procured ADSL 2+ modem router and it was easily configurable to access the TPG data connection. Various screenshots are logged to keep handy the setup which works well now.. don't know about the future..


UPDATE 17/03/2017

Screenshot of xDSL is showing reduced speed


UPDATE 21/04/2017

After the recent issue with speed, disconnection, no dialtone in landline. Screenshot of xDSL page of the modem is showing reduced speed
Upstream: 975Kbps
Downstream: 5288Kbps


U
top