[Solved] - HP F4488 not printing - /usr/lib/cups/backend/hp failed

Happen to remove my color cartridge and test out only with my black cartridge. It worked the first time but later on every time when I selected the printer with the respective application beside the deskjet F4400 - /usr/lib/cups/backend/hp failed was displayed. I tried stopping and restarting the cupsys daemon
/etc/init.d/cupsys.d stop
/etc/init.d/cupsys.d start

I couldn't get it started so following the instruction at http://chenjie66.wordpress.com/2011/03/26/usrlibcupsbackendhp-failed/ which did work.

I don't know whether the gui equivalent of such resolution is available or not.
like
system->adminstration->printing

user@dell-laptop:~$ sudo cat /etc/cups/printers.conf
# Printer configuration file for CUPS v1.3.7
# Written by cupsd on 2011-12-24 09:50
<Printer Deskjet_F4400>
Info Deskjet_F4400
DeviceURI hp:/usb/Deskjet_F4400_series?serial=CN03JC330405C5

State Stopped
StateMessage /usr/lib/cups/backend/hp failed

StateTime 1324700406
Accepting Yes
Shared Yes
JobSheets none none
QuotaPeriod 0
PageLimit 0
KLimit 0
OpPolicy default
ErrorPolicy retry-job
</Printer>
<Printer Deskjet_F4400_series>
Info HP Deskjet F4400 series
DeviceURI hp:/usb/Deskjet_F4400_series?serial=CN03JC330405C5
State Idle
StateTime 1280592353
Accepting Yes
Shared Yes
JobSheets none none
QuotaPeriod 0
PageLimit 0
KLimit 0
OpPolicy default
ErrorPolicy retry-job
</Printer>
<Printer PDF>
Info PDF
DeviceURI cups-pdf:/
State Idle
StateTime 1214886871
Accepting Yes
Shared No
JobSheets none none
QuotaPeriod 0
PageLimit 0
KLimit 0
OpPolicy default
ErrorPolicy retry-job
</Printer>
user@dell-laptop:~$

change State to Idle
 and
remove StateMessage and the printer starts to work normally

other outputs at the time of failed service

user@dell-laptop:~$ sudo cat /var/log/cups/error_log
E [31/Jul/2010:21:35:53 +0530] CUPS-Add-Modify-Printer: Unauthorized
E [31/Jul/2010:22:58:36 +0530] CUPS-Add-Modify-Printer: Unauthorized
E [01/Dec/2010:17:09:30 +0530] PID 8565 (/usr/lib/cups/backend/hp) stopped with status 4!
E [01/Dec/2010:17:18:09 +0530] PID 9535 (/usr/lib/cups/backend/hp) stopped with status 4!
E [02/Dec/2010:11:50:52 +0530] PID 6337 (/usr/lib/cups/backend/hp) stopped with status 1!
E [10/Mar/2011:06:14:49 +0530] PID 14855 (/usr/lib/cups/backend/hp) stopped with status 1!
E [10/Mar/2011:06:15:19 +0530] PID 14883 (/usr/lib/cups/backend/hp) stopped with status 1!
E [10/Mar/2011:06:20:34 +0530] PID 7016 (/usr/lib/cups/backend/hp) stopped with status 1!
E [10/Mar/2011:07:42:25 +0530] PID 6329 (/usr/lib/cups/backend/hp) stopped with status 1!
E [10/Mar/2011:07:42:27 +0530] PID 6746 (/usr/lib/cups/backend/hp) stopped with status 1!
E [10/Mar/2011:07:47:37 +0530] PID 8042 (/usr/lib/cups/backend/hp) stopped with status 1!
E [10/Mar/2011:07:47:39 +0530] PID 8047 (/usr/lib/cups/backend/hp) stopped with status 1!
E [10/Mar/2011:07:52:49 +0530] PID 8267 (/usr/lib/cups/backend/hp) stopped with status 1!
E [10/Mar/2011:07:52:50 +0530] PID 8272 (/usr/lib/cups/backend/hp) stopped with status 1!
E [10/Mar/2011:07:58:01 +0530] PID 8581 (/usr/lib/cups/backend/hp) stopped with status 1!
E [10/Mar/2011:07:58:02 +0530] PID 8586 (/usr/lib/cups/backend/hp) stopped with status 1!
E [10/Mar/2011:08:03:13 +0530] PID 8799 (/usr/lib/cups/backend/hp) stopped with status 1!
E [10/Mar/2011:08:03:14 +0530] [Job 20] Canceling job since it could not be sent after 5 tries.
E [10/Mar/2011:08:03:14 +0530] PID 8804 (/usr/lib/cups/backend/hp) stopped with status 1!
E [10/Mar/2011:08:03:15 +0530] [Job 22] Canceling job since it could not be sent after 5 tries.
E [24/Dec/2011:09:50:05 +0530] PID 9822 (/usr/lib/cups/backend/hp) stopped with status 4!

dmesg

usblp0: removed
[  373.784336] usb 7-1: USB disconnect, address 2
[  397.575185] usb 7-1: new high speed USB device using ehci_hcd and address 3
[  397.709008] usb 7-1: configuration #1 chosen from 1 choice
[  397.709980] usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0x7711
[  411.401418] usb 7-1: USB disconnect, address 3
[  411.401999] usblp0: removed
[  429.409997] usb 7-1: new high speed USB device using ehci_hcd and address 4
[  429.543896] usb 7-1: configuration #1 chosen from 1 choice
[  429.545109] usblp0: USB Bidirectional printer dev 4 if 1 alt 0 proto 2 vid 0x03F0 pid 0x7711
[  435.642008] usblp0: removed
[  452.488867] usb 7-1: USB disconnect, address 4

The result of a working printer with almost all the indicator blinking as if it won't work but IT WORKS