Replica of the RF information of WA3002G4

A mere look at the Wa3002G4 for the RF band it was using gave more than what was needed (incomprehensible and not interested to dig deep right now)

This page allows you to configure advanced features of the wireless LAN interface. You can select a particular channel on which to operate, force the transmission rate to a particular speed, set the fragmentation threshold, set the RTS threshold, set the wakeup interval for clients in power-save mode, set the beacon interval for the access point, set XPress mode and set whether short or long preambles are used.

AP isolation:    off
Band:        2.4GHz
Channel:    11
Auto channel Timer(min):    0
54g Rate:    Auto
Multicast Rate: Auto
Basic Rate:    Default
Fragmentation Threshold:    2346
RTS:        2347
Beacon Interval:    100
DTIM Interval:    1
XPress technology:    disabled
54g Mode:    54g Auto
54g Protection:    Auto
Preamble type:    long
Transmit Power:    100%

some put it under open spectrum or ISM band


Post a Comment